材料科学
转化膜
复合数
腐蚀
成核
锌
镀锌
结晶
冶金
氧化物
晶界
表面粗糙度
化学工程
复合材料
微观结构
图层(电子)
化学
有机化学
工程类
作者
A.H. Riyas,Chanassery Vinayababu Geethanjali,S. Arathy,Anaswara Anil,S.M.A. Shibli
标识
DOI:10.1016/j.apsusc.2022.153370
摘要
• Composite hot-dip conversion coating with improved tribological characteristics. • Critical compositions of Al 2 O 3 /Mo composite in zinc phosphate conversion coating is fine tuned. • Incorporation of Mo leads to the phase transformation from γ to α-Al 2 O 3 . • Al 2 O 3 /Mo particles in the phosphating bath can act as a nucleating agent during the phosphating process. • The composite coating exhibits a very high R ct value and a very low C dl value. Recently, phosphate conversion coatings have been modified by transition/non-transition metal oxide with distinguished characteristic features such as corrosion resistance, wear resistance, lubrication and adhesion. The present paper explores the development of Al 2 O 3 /Mo composite incorporated zinc phosphate coatings on galvanized steel for achieving higher corrosion-resistant characteristics with an added advantage of tribological performance. Incorporation of Mo leads to the phase transformation from γ to α-Al 2 O 3 , which ensures the subsequent crystallization of alumina particles by the anisotropic grain growth of Mo content. Particle size, elemental composition and morphology of the Al 2 O 3 /Mo composite are tuned for retaining the stable crystalline alpha phase of the composite. The optimum concentration of the tuned content of Al 2 O 3 /Mo composite in the phosphating solution can effectively perform as an active nucleating source for the establishment of more compact, homogeneous and dense zinc phosphate crystal growth and coverage in the galvanized steel surface by significantly reducing the activation energy during the phosphating process. The resultant composite phosphate coating ensures the formation of a large quantity of crystalline hopeite rich phase compared to other coatings, which effectively acts as an insulator during the electrochemical reaction by imparting a corrosion-resistant barrier between the substrate and corrosive media. Uniform distribution of composite particles at the grain boundaries and at the bulk grain composition is also achieved. Lower average surface roughness (S a ), root mean square surface roughness (S q ), maximum height (S t ), surface skewness (S sk ) and higher surface kurtosis (S ku ) values are acquired for better anti-corrosion properties with excellent tribological performance. The higher R p and R ct values with lower C dl and corrosion rate values of the tuned composition of Al 2 O 3 /Mo composite based zinc phosphate coating confirms the better porosity and thereby enhances the corrosion-resistant performance due to the sealing action of the composite.
科研通智能强力驱动
Strongly Powered by AbleSci AI