Accurate Distortion Prediction for Thermal Memory Effect in Power Amplifier Using Multi-Stage Thermal RC-Ladder Network

Distortion characteristics caused by the thermal memory effect in power amplifiers were accurately predicted using a multi-stage thermal RC-ladder network derived by simplifying the heat diffusion equation. Assuming a steep gradient of heat diffusion near an intrinsic transistor region in a semiconductor substrate, the steady state temperature, as well as the transient thermal response at the transistor region, was estimated. The thermal resistances and thermal capacitances were adjusted to fit a temperature distribution characteristic and a step response characteristic of temperature in the substrate. These thermal characteristics were calculated by thermal FDTD simulation. For an InGaP/GaAs HBT, a step response characteristic for a square-wave voltage signal input was simulated using a large-signal model of the HBT connecting the multi-stage thermal RC-ladder network. The result was verified experimentally. Additionally, for an RF-amplifier using the HBT, the 3rd-order intermodulation distortion caused by the thermal memory effect was simulated and this result was also verified experimentally. From these verifications, a multi-stage thermal RC-ladder network can be used to accurately design super linear microwave power amplifiers and linearizers.