材料科学
灵敏度(控制系统)
光纤传感器
压力传感器
光纤
光学
光电子学
谐波
压力测量
谐波分析
干涉测量
折射率
游标尺
纤维
光学滤波器
集成光学
光纤布拉格光栅
保偏光纤
校准
电容感应
渐变折射率纤维
频率响应
作者
Yuanqing Wang,Su Sheng,Xinyu Liu,Yuheng Wang,Anning Zhu,Jian Guo Wen,Chao Jiang
标识
DOI:10.1109/tim.2026.3750621
摘要
This paper presents a highly sensitive optical fiber pressure sensor based on a Fabry-Perot interferometer (FPI) featuring a silver/polyvinylidene fluoride (Ag/PVDF) composite diaphragm. Fabricated via femtosecond laser micromachining, the sensor exploits the enhanced harmonic Vernier effect (EHVE) to achieve superior sensing performance. Three distinct Fabry-Perot cavities (FPI1, FPI2, and FPI3) were experimentally developed. FPI1 was constructed by splicing a single-mode fiber (SMF) to a capillary tube, followed by sequential coating with a silver film and a PVDF protective layer to form a closed cavity. Conversely, FPI2and FPI3utilized an open-cavity “SMF-capillary-SMF” architecture, incorporating micro-holes drilled via a femtosecond laser. Due to these structural variations, FPI1 exhibited a negative pressure sensitivity drift, whereas FPI2and FPI3demonstrated positive drifts. Paralleling FPI1and FPI2generated an enhanced Vernier effect (EVE), yielding a pressure sensitivity of 122.034 nm/MPa. By paralleling FPI1and FPI3, the EHVE was excited, significantly amplifying the pressure sensitivity to 280.114 nm/MPa—a 75.89-fold enhancement compared to a standalone FPI. Furthermore, the sensor exhibited excellent repeatability, linearity, stability, and a negligible temperature cross-sensitivity of 4.4×10-3MPa/°C. These compelling performance metrics highlight the sensor’s significant potential for high-precision environmental and industrial pressure monitoring.
科研通智能强力驱动
Strongly Powered by AbleSci AI