Thermo-Mechanical Reliability of TGV: Influence of Side wall angle and Copper Thickness
作者
Siyu Chen,Yiqian Huang,Yuhao Cao,Xinyuan Wang,Ruijie Liu,Yun Mou,Guisheng Gan
出处
期刊: [Institute of Electrical and Electronics Engineers] 日期:2026-08-01卷期号:: 1-5
标识
DOI:10.1109/icept71373.2026.11690319
摘要
Leveraging its low-cost nature and superior high-frequency capabilities, through-glass via (TGV) architectures have become highly critical for next-generation high-density vertical advanced packaging schemes. Nonetheless, the significant thermal expansion divergence between the electroplated copper and the glass matrix inevitably induces structural thermal stresses, raising reliability concerns in Cu-filled TGV. In this work, finite element models of single-taper and double-taper TGV were established to investigate the effects of sidewall angle and Cu thickness on stress evolution under transient thermal loading. Results show that increasing sidewall angle reduces Cu protrusion and relieves interfacial stress near via openings, but introduces local stress concentration in double-taper structures. Moreover, increasing Cu thickness reduces stress concentration in Cu layer, while increases the overall stress level in glass. Considering the trade-off between Cu deformation and glass stress accumulation, a sidewall angle of 5–8° and a Cu thickness of 8–15 μm provide the most balanced thermo-mechanical performance. These results offer useful guidelines for the structural design of reliable TGV.