材料科学
摩擦学
磨料
复合数
复合材料
压痕硬度
打滑(空气动力学)
铜
电弧
耐磨性
冶金
滑环,滑环
图层(电子)
粘着磨损
包层(金属加工)
激光器
润滑性
电接点
表面光洁度
电阻率和电导率
合金
真空电弧
作者
Lei Hu,Yuxin Jiang,Minglang Zhang,Xue Zuo,Yuankai Zhou
摘要
Abstract High-power electrical slip rings, such as those employed in marine electric propulsion, require low contact resistance, high wear resistance, and excellent arc erosion resistance. To address these issues, TiB2/Cu composite coatings were fabricated by laser cladding. The friction and wear mechanism of the cladding layer under current-carrying conditions was analyzed through current-carrying friction and wear tests. At a laser power of 1600 W, cracks and pores at the interface were minimized, yielding sound metallurgical bonding, and the clad layer achieved an electrical conductivity of 90.8% IACS (International Annealed Copper Standard) and a microhardness of 197 HV. The dominant mechanism changed from abrasive wear at 5 A to adhesive wear coupled with arc erosion at 20 A, and finally to arc erosion wear at 40 and 50 A. The results show that the coating's wear and anti-arc erosion resistance are markedly enhanced by the addition of a TiB2 reinforcing phase, delivering superior service performance under high-current conditions compared with a pure copper coating. The results supply theoretical and technical support aimed at improving the reliability of marine slip ring components exposed to high current.
科研通智能强力驱动
Strongly Powered by AbleSci AI