材料科学
压力传感器
碳纳米管
MXenes公司
光电子学
灵敏度(控制系统)
压阻效应
可穿戴计算机
纳米技术
制作
计算机科学
电子工程
机械工程
嵌入式系统
医学
替代医学
病理
工程类
作者
Zhihong Fan,Lei Zhang,Qiulin Tan,Xue Feng Yao,Baimao Lin,Ya Wang,Jijun Xiong
标识
DOI:10.1088/1361-665x/abe030
摘要
Abstract High-performance flexible pressure sensors are attracting great interest owing to their potential applications for electronic skins, human–machine interfaces, and biomedical diagnostics. However, there remain significant challenges for the fabrication of low-cost and high-sensitivity sensors. Here, we report the preparation of Ti 3 C 2 T x MXene/single-wall carbon nanotube (SWNT) composite films through vacuum-assisted filtration followed by thermal shrinkage. SWNTs can effectively prevent MXenes from stacking and improve the electrical performance of the films. The films are used as a flexible piezoresistive sensor for pressures ranging from 33 Pa to 130 kPa. And experimental test results indicate that the fabricated pressure sensors have high sensitivity (116.15 kPa −1 below 40 kPa and 12.7 kPa −1 at 40–130 kPa), a fast response time of 13 ms, and long-term stability over 6000 periods. The sensor can be used to monitor human physiological signals, such as finger movements, voice detection, and wrist pulse in real-time. Moreover, a 4 × 4 sensor array was successfully applied in the pressure distribution mapping of different objects, indicating that the pressure sensor can be applied in electronic skin, medical devices, and other wearable devices.
科研通智能强力驱动
Strongly Powered by AbleSci AI