Experimental investigation of wind loads on wind turbine blade under various turbulent flows

For investigation of the effects of turbulence intensity (TI) on the wind loads on wind turbine blade, a 1:20 scaled model of a typical 3D wind turbine blade is designed and used for the pressure measurement test in a wind tunnel. Five uniform flows with different turbulence intensities are simulated in the wind tunnel test. The mean and root-mean-square (RMS) wind pressure coefficients, base moment coefficients, and their power spectral densities are presented and discussed in detail. Combined with the dynamic properties of the blade structure, wind-induced displacements at the tip of the blade are calculated by the random vibration theory. The results show that the increasing of TI amplifies the aerodynamic loads on the blade in terms of RMS wind pressure coefficients and RMS bending moment coefficients. Large wind-induced displacement of the wind turbine blade may be stimulated by high TI even under the feathering condition. This article aims to further the understanding of wind loads on wind turbine blades and provide useful information for the wind-resistant design of wind farms established in regions with high turbulence levels.