MXene Supported Electrodeposition Engineering of Layer Double Hydroxide for Alkaline Zinc Batteries

Abstract The main challenges faced by aqueous rechargeable nickel‐zinc batteries are their comparatively low energy density and poor cycling stability, mainly due to the limited capacity and reversibility of existing Ni‐based cathodes. Moreover, the preparation procedures of these cathodes are complex and not easily scalable, which makes them less promising for large‐scale energy storage. Herein, we utilized MXene as a functional additive to effectively improve the electrodeposition preparation of NiCo layered double hydroxides (LDH). Benefiting from the improved interfacial contact between nickel foam (NF) and platting solution and the enhanced ionic conductivity of platting product based on MXene additives, the resulting binder‐free NiCo LDH electrode can achieve ultrahigh areal loading (~65 mg cm −2 ) with abundant active surface for redox reactions and maintained short transport pathway for ion diffusion and charge transfer. Furthermore, the as‐fabricated alkaline NiCo LDH‐based battery delivers high discharge capacity, up to 20.2 mAh cm −2 (311 mAh g −1 ), accompanied by remarkable rate performance (9.6 mAh cm −2 or 148 mAh g −1 at 120 mA cm −2 ). Due to the high structural and chemical stability of MXenes/LDH‐based electrode, excellent cycling life can also be achieved with 88.6 % capacity retention after 10000 cycles. In addition, ultrahigh areal energy density (31.2 mWh cm −2 ) and gravimetric energy density (465 Wh kg −1 ) can be simultaneously achieved. This work has inspired the design of advanced cathode materials to develop high‐performance aqueous zinc batteries.