薄膜晶体管
材料科学
背板
晶体管
光电子学
电解质
无定形固体
数码产品
纳米技术
柔性电子器件
逻辑门
印刷电子产品
聚合物
同质性(统计学)
电子工程
氧化物
有源矩阵
氧化物薄膜晶体管
宽禁带半导体
电气工程
理论(学习稳定性)
有机发光二极管
电压
灵活的显示器
作者
Sushree Sangita Priyadarsini,Oliver Durnan,Ioannis Kymissis,Subho Dasgupta
标识
DOI:10.1002/admt.202501305
摘要
ABSTRACT Printed thin‐film transistors (TFTs) aim to address specific applications in wearable/consumer electronics. Within the printed electronics domain, electrolyte gating has recently attracted wide attention as the gel electrolytes are easy to print and cure, thermally/ environmentally stable, and offer sufficiently high operation frequency necessary for the targeted applications. However, so far, with electrolyte‐gated TFTs (EGFETs), the researchers have primarily focused on the near‐OFF state logic operation, whereas their ON‐state operation or bias‐stress stability has rarely been investigated. In contrast, here we present, a detailed study on the positive bias‐stress stability of inkjet‐printed composite solid polymer electrolyte (CSPE)‐gated TFTs with three different indium‐rich oxide systems, c ‐In 2 O 3 , a ‐IGO, and a ‐IGZO. The findings suggest that a ‐IGO is the optimal solution to obtain spatial homogeneity and excellent long‐term bias‐stress stability, without compromising on the TFT performance. Here, even after 12 h of biasing, a nominal Δ I D,ON ≈10%, Δ V T < 0.25 V have been observed. Furthermore, the load‐bearing capacity of the EGTFTs has been demonstrated by illuminating 54 LEDs for 6 h, with a single a ‐IGO‐based TFT. Next, the integration of the EGTFTs with GaN‐based micro‐LEDs has also been demonstrated. This study paves the way towards real‐life applications, e.g., CSPE‐gated TFT backplanes for all‐printed flexible displays.
科研通智能强力驱动
Strongly Powered by AbleSci AI