Effectively boosting hydration capacity and oxygen reduction activity of cobalt-free perovskite cathode by K+ doping strategy for protonic ceramic fuel cells

Development of triple-conducting cathode can extend the electrochemically active region to the entire cathode to more effectively promoting oxygen reduction reaction (ORR). Herein, a cobalt-free perovskite Sr1.75K0.25Fe1.5Mo0.5O6−δ (SKFM) was developed as a single-phase triple-conducting cathode material for protonic ceramic fuel cells (PCFCs). Introduction of K into Sr-site leads to a 21.54 % increase in the hydration capacity compared to the undoped Sr2Fe1.5Mo0.5O6−δ (SFM). The bulk diffusion coefficient and surface exchange coefficient of SKFM are 3.8 and 5.2 times higher than those of SFM at 550 °C, respectively. XAS and EPR results demonstrate that the average valence state of Fe and the concentration of surface oxygen vacancies in SKFM are higher than those in SFM. The polarization resistances (Rp) value of SKFM cathode in wet air is 0.06 Ω cm2 at 700 °C, while it is 0.11 Ω cm2 for SFM cathode, which is reduced by 45.5 %, indicating significantly improved ORR activity. The Rp is dominated by the adsorption and diffusion process of oxygen associated with low-frequency part in wet air. The single cell with a configuration of Ni-BZCY4/21-μm-thick BZCY4/SKFM delivers a power output of 1000.8 mW cm−2 in wet H2 at 700 °C and steady operation at 600 °C for a total of 100 h.