无损检测
微波食品加热
腐蚀
材料科学
微波成像
离群值
计算机科学
工艺工程
机械工程
法律工程学
工程类
复合材料
人工智能
电信
医学
放射科
作者
Tan Shin Yee,Nawaf H. M. M. Shrifan,Ahmed Jamal Abdullah Al-Gburi,Nor Ashidi Mat Isa,Muhammad Firdaus Akbar
出处
期刊:IEEE Access
[Institute of Electrical and Electronics Engineers]
日期:2022-01-01
卷期号:10: 88191-88210
被引量:27
标识
DOI:10.1109/access.2022.3197291
摘要
Corrosion under insulations is described as localized corrosion that forms because of moisture penetration through the insulation materials or due to contaminants’ presence within the insulation material. The traditional non-destructive inspection techniques operating at a low frequency require removing insulation material to enable inspection, due to poor signal penetration. Several high-frequency inspection techniques such as the microwave technique have shown successful inspection in detecting the defect under insulations, without removing the insulations. However, the microwave technique faces several challenges such as poor spatial imaging, large errors in terms of defect size and depth owing to stand-off distance variations, optimal frequency point selection, and the presence of the outlier in microwave measurement data. The microwave technique in conjunction with machine learning approaches has tremendous potential and viability for assessing corrosion under insulation. This paper provides an in-depth review of non-destructive techniques for assessing corrosion under insulation, as well as the possibility of using machine learning approaches in microwave techniques in comparison to other conventional techniques.
科研通智能强力驱动
Strongly Powered by AbleSci AI