弹性模量
材料科学
超压
比模量
体积模量
模数
复合材料
机械
热力学
物理
作者
Shilin Lei,Yulong Duan,Jun Long,Kai-jun Xiang,Liwen Liu,Zehuan Li,Ziyang Wen,Lulu Zheng
出处
期刊:Thermal Science
[Vinča Institute of Nuclear Sciences]
日期:2023-12-07
卷期号:28 (3 Part B): 2693-2702
被引量:1
标识
DOI:10.2298/tsci230805263l
摘要
The factor of combustion and explosion remains one of the main constraints on coal mining and management. To clarify the impact of structural properties on the consequences of gas explosion disasters during coal mining, this article conducts a study on the impact of the elastic modulus of structures on gas explosion disasters. The research results indicate that in the case where structures with high elastic modulus must exist, the elastic modulus of the structure has minimal impact on the structure during the early stage of flame development. The area of flame front and the degree of deflagration also decrease with the increase of elastic modulus, but the disturbance degree of air-flow and flame in the pipe increases with the increase of elastic modulus. The peak flame velocity at elastic modulus of 0.7 GPa and 2.8 GPa increased by 3.56% and 7.47% compared to elastic modulus of 0.18 GPa, respectively. The upstream overpressure peak increased by 24.63% and 42.52%. The downstream overpressure peak increased by 11.19% and 20.62%. The peak values of flame velocity and overpressure increase with the increase of elastic modulus, while the explosion intensity and pressure rise rate increase with the increase of elastic modulus. The explosion intensity index at elastic modulus 2.8 GPa is approximately 1.45 times that at elastic modulus 0.18 GPa. Therefore, it is necessary to choose structures with smaller elastic modulus as much as possible to achieve the best fire and explosion suppression effect.
科研通智能强力驱动
Strongly Powered by AbleSci AI