材料科学
结晶度
微晶
聚合物
接受者
层状结构
聚合
电子供体
聚合物太阳能电池
结晶学
化学工程
电子受体
能量转换效率
高分子化学
光化学
有机化学
光电子学
化学
复合材料
催化作用
冶金
凝聚态物理
工程类
物理
作者
Jihye Jung,Wonho Lee,Changyeon Lee,Hyungju Ahn,Bumjoon J. Kim
标识
DOI:10.1002/aenm.201600504
摘要
Molecular orientation, with respect to donor/acceptor interface and electrodes, plays a critical role in determining the performance of all‐polymer solar cells (all‐PSCs), but is often difficult to rationally control. Here, an effective approach for tuning the molecular crystallinity and orientation of naphthalenediimide‐bithiophene‐based n‐type polymers (P(NDI2HD‐T2)) by controlling their number average molecular weights (Mn) is reported. A series of P(NDI2HD‐T2) polymers with different Mn of 13.6 (PL), 22.9 (PM), and 49.9 kg mol−1 (PH) are prepared by changing the amount of end‐capping agent (2‐bromothiophene) during polymerization. Increasing the Mn values of P(NDI2HD‐T2) polymers leads to a remarkable shift of dominant lamellar crystallite textures from edge‐on (PL) to face‐on (PH) as well as more than a twofold increase in the crystallinity. For example, the portion of face‐on oriented crystallites is dramatically increased from 21.5% and 46.1%, to 78.6% for PL, PM, and PH polymers. These different packing structures in terms of the molecular orientation greatly affect the charge dissociation efficiency at the donor/acceptor interface and thus the short‐circuit current density of the all‐PSCs. All‐PSCs with PTB7‐Th as electron donor and PH as electron acceptor show the highest efficiency of 6.14%, outperforming those with PM (5.08%) and PL (4.29%).
科研通智能强力驱动
Strongly Powered by AbleSci AI