胶体
材料科学
流变学
胶体二氧化硅
润湿
化学工程
粘度
接触角
硅烷
复合材料
表观粘度
钾
纳米颗粒
透射电子显微镜
传输速率
动态力学分析
胶粘剂
涂层
作者
Dana Němcová,Klára Kobetičová,Petra Tichá,Ivana Burianová,Dana Koňáková,Pavel Kejzlar,Martin Böhm
出处
期刊:Surfaces
[Multidisciplinary Digital Publishing Institute]
日期:2025-11-29
卷期号:8 (4): 88-88
被引量:2
标识
DOI:10.3390/surfaces8040088
摘要
This study investigates the optimization of sol–silicate façade coatings modified with colloidal silica and a silane-based hydrophobizing additive to enhance hydrophobicity while maintaining a high water-vapor transmission rate (V). The effects of the binder ratio between potassium water glass (WG) and colloidal silica (CS), the type of colloidal silica (unmodified or epoxy-silanized), and the concentration of the hydrophobizing additive (HA) were systematically evaluated. Water-vapor transmission was determined according to EN ISO 7783, and surface wettability was measured before and after accelerated UV-A aging. Dynamic viscosity was monitored for two years to assess long-term storage stability. The optimized formulation contained 7 wt % potassium water glass, 15 wt % colloidal silica, and 1 wt % hydrophobizing additive. It exhibited stable viscosity over time (≈19,000 mPa·s after six months), high water-vapor transmission (V > 6700 g·m−2·d−1, class V1), and an initial contact angle of 118°, which decreased only moderately after UV-A exposure. Coatings containing epoxy-silanized colloidal silica showed slightly lower transmission but still remained within the high V range suitable for vapor-open façade systems. The results confirm that balanced sol–silicate systems can combine durable hydrophobicity with long-term rheological and functional stability.
科研通智能强力驱动
Strongly Powered by AbleSci AI