环境科学
工艺工程
生命周期评估
水准点(测量)
超临界流体
发电
吸收(声学)
发电站
热电联产
计算机科学
联合循环
汽车工程
温室气体
热能
全球变暖潜力
热的
功率(物理)
传质
接触器
高效能源利用
整体气化联合循环
按来源划分的电力成本
布莱顿循环
能量(信号处理)
超临界二氧化碳
热效率
朗肯循环
材料科学
火力发电站
环境影响评价
二氧化碳
核工程
传热
全球变暖
工程类
模拟
作者
Alexandru-Constantin Bozonc,Călin-Cristian Cormoş,Letitia Petrescu,Simion Drăgan,Ana‐Maria Cormos
标识
DOI:10.1021/acs.iecr.6c03659
摘要
Abstract This study evaluates two hybrid postcombustion CO2 capture configurations and benchmarks them against a net 1000 MW supercritical coal-fired power plant without carbon capture. Case 2 integrates HFMC-based absorption with thermal regeneration in Mellapak structured packing, while case 3 combines Mellapak absorption with vacuum-assisted HFMC regeneration. Detailed absorber and desorber models were developed in MATLAB/Simulink and coupled in Aspen Plus full-plant flowsheets to ensure consistent mass and energy balances, achieving a 90% capture rate. Among the captured assessed systems, case 3 shows the best technical performance, reaching an electrical efficiency of 35.35% and reducing SPECCA to 2.17 MJ/kg CO2, compared with 3.77 MJ/kg CO2 for case 2. Economically, case 3 also provides the lowest levelized cost of electricity, 100.33 €/MWh, and CO2 avoidance cost, 57.50 €/t CO2. The cradle-to-gate Life Cycle Assessment indicates an approximately 74% reduction in global warming potential, although increases occur in other impact categories when competed with the benchmark noncapture configuration, highlighting the trade-offs associated with deep decarbonization. Overall, the results demonstrate that membrane-based regeneration strategies can significantly enhance energy efficiency, together with economic and environmental performance of postcombustion CO2 capture.
科研通智能强力驱动
Strongly Powered by AbleSci AI