机器人焊接
弹道
机器人
工业机器人
计算机科学
焊接
机械臂
控制器(灌溉)
同步(交流)
激光束焊接
工作区
抓住
运动规划
笛卡尔坐标系
灵活性(工程)
运动控制
模拟
同步
同轴
视觉伺服
控制工程
机器人末端执行器
计算机视觉
激光跟踪器
运动控制器
机器视觉
机器人控制
钥匙(锁)
机械工程
机器人运动学
人工智能
门
可视化
作者
Matteo Moscatelli,Mara Tanelli,Ali Gökhan Demir
标识
DOI:10.1016/j.jmapro.2026.08.049
摘要
In the current industrial landscape, robotic laser welding remains highly dependent on skilled operators, particularly during setup and path programming. Existing seam tracking systems typically operate as correction layers on predefined trajectories, limiting flexibility and requiring extensive pre-welding preparation. This paper presents a vision-based framework for online trajectory generation without a predefined welding path. A coaxial camera provides real-time visual feedback of the welding zone, processed by a deep-learning-based module to extract seam geometry. The estimated seam is incrementally converted into cartesian motion targets and streamed to an industrial robot controller for execution. A key contribution is the latency-aware integration of perception, incremental trajectory planning, and a proprietary industrial robot controller. Instead of using a fixed control frequency, the system generates target poses in an event-driven manner, based on visual prediction availability and robot execution state. On the tested hardware, a nominal 35 ms perception-to-execution latency is managed through adaptive synchronization and partially overlapping trajectory segments. Experimental validation on linear and curved stainless steel and aluminum alloys yielded prediction-to-seam deviations below 200 μ m with respect to manually annotated seam centerlines, while robot execution fidelity was quantified through command-to-execution cross-track deviations. Continuous execution was maintained even under initial positional misalignment.
科研通智能强力驱动
Strongly Powered by AbleSci AI