摩擦电效应
材料科学
静电纺丝
纳米发生器
纳米纤维
纳米技术
导电体
碳纳米纤维
碳化
碳纳米管
膜
电压
电导率
光电子学
电阻率和电导率
纤维
电极
灵敏度(控制系统)
复合材料
作者
Y. D. Li,Jinsong Xie,Tianqi Liu,W. Chen,Wei Yang
出处
期刊:Langmuir
[American Chemical Society]
日期:2025-12-27
卷期号:42 (1): 1678-1690
被引量:1
标识
DOI:10.1021/acs.langmuir.5c05728
摘要
Electrospinning is a versatile technique for fabricating triboelectric materials. Although carbonization can significantly improve the electrical conductivity of fiber membranes, their application as triboelectric layers remains underexplored. In this work, a copper–silver (CuAg) alloy-doped carbon nanofibers (CuAg@CNFs) membrane was designed and employed as a triboelectric layer to enhance the accuracy and sensitivity of self-powered tactile sensors based on triboelectric nanogenerators (TENGs) for material identification. The CuAg@CNFs membrane, obtained by electrospinning and subsequent thermal conversion, exhibits a three-dimensional conductive network with in situ–generated alloy nanoparticles. Such a structural configuration promotes efficient charge migration across the interface, thereby enhancing electrical output. The fabricated CuAg@CNFs based-TENG delivers an output voltage of 4.3 V and a charge density of 40 nC m –2, maintaining stable operation over repeated cycles. By correlating triboelectric signals with material surface characteristics, an intelligent sensing framework integrating a convolutional neural network (CNN) was constructed. The system achieved a recognition accuracy of 99.6% across ten materials and maintained high discriminative capability in complex environments. During real-time operation, the recognition accuracy for four types of material categories (aluminum, board, glass, and plastic) reached 100, 93, 99, and 97.5%, respectively. This study demonstrates a feasible strategy for constructing high-performance self-powered sensing systems through the synergistic combination of material design and machine learning algorithms.
科研通智能强力驱动
Strongly Powered by AbleSci AI