热电效应
热导率
材料科学
热电材料
电阻率和电导率
有效质量(弹簧-质量系统)
塞贝克系数
热力学
复合材料
电气工程
物理
量子力学
工程类
作者
Ke Zhao,Dongyang Wang,Tao Hong,Jiaqi Zhu,Siqi Wang,Shaobo Cheng,Xiang Gao,Chongxin Shan,Li‐Dong Zhao
标识
DOI:10.1002/advs.202506963
摘要
Abstract Thermoelectric materials, which facilitate the mutual conversion between thermal and electrical energy, offer a promising alternative for sustainable energy solutions. High‐performance thermoelectric materials require excellent electrical conductivity and low thermal conductivity. Among emerging candidates, AB 2 X 4 (A = Ge, Sn, Pb; B = Sb, Bi; X = Se, Te) compounds have garnered attention due to their unique septuple atomic layered crystal structure and poor lattice thermal conductivity. Here, the septuple atomic layered SnBi 2 Te 4 is successfully synthesized and its thermoelectric performance significantly enhanced through isovalent elements alloying. The peak ZT ≈ 0.56 at 473 K and an average ZT ≈ 0.47 achieved over the temperature 300–673 K, which is 12 and 14 times higher than those in pristine SnBi 2 Te 4 . The incorporation of Sb and Se into p ‐type SnBi 2 Te 4 system significantly improves thermoelectric performance through three synergistic mechanisms: 1) enhance the electrical conductivity via effective mass enlarging, 2) suppress the bipolar thermal diffusion through bandgap widening, and 3) reduce the lattice thermal conductivity by point defect scattering. The results demonstrate that isovalent elements alloying is an effective strategy to realize the promising high performance of septuple atomic layered p ‐type SnBi 2 Te 4 , which is applicable strategy for AB 2 X 4 based compounds.
科研通智能强力驱动
Strongly Powered by AbleSci AI