Flexible fabrication chitosan-polyamidoamine aerogels by one-step method for efficient adsorption and separation of anionic dyes

Chitosan in situ grown polyamidoamine (CTS-Gx PAMAM (x = 0, 1, 2, 3)) aerogels were fabricated by a facile one-step freeze-drying method, with glutaraldehyde serving as a crosslinker. The three-dimensional skeletal structure of aerogel provided numerous adsorption sites and accelerated the effective mass transfer of pollutants. The adsorption kinetics and isotherm studies of the two anionic dyes were consistent with the pseudo-second-order and Langmuir models, indicating that the removal of rose bengal (RB) and sunset yellow (SY) was a monolayer chemisorption process. The maximum adsorption capacity of RB and SY reached 370.28 mg/g and 343.31 mg/g, respectively. After five adsorption-desorption cycles, the adsorption capacities of the two anionic dyes reached 81.10% and 84.06% of the initial adsorption capacities, respectively. The major mechanism between the aerogels and dyes was systematically investigated based on using Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, and energy-dispersive spectroscopy analyses, confirming that electrostatic interaction, hydrogen bonding and van der Waals interactions were the main driving forces for the superior adsorption performance. Furthermore, the CTS-G2 PAMAM aerogel exhibited good filtration and separation performance. Overall, the novel aerogel adsorbent possesses excellent theoretical guidance and practical application potential for the purification of anionic dyes.