Electronic tongue for the simple and rapid determination of taste and odor compounds in water

Taste and odor (T&O) compounds present in natural water bodies could originate from algae. In this study, alga-generated compounds that can cause T&O issues in water, such as geosmin (GE), 2-Methylisoborneol (MIB), 2,4,6-Trichloroanisole (TCA), 2-Methylbenzofuran (MB), 2-Isopropyl-3-methoxypyrazine (IPMP), 2-Isobutyl-3-methoxypyrazine (IBMP), cis-3-Hexenyl acetate (HA), trans,trans-2,4-Heptadienal (HD), trans,cis-2,6-Nonadienal (ND), and trans-2-Decenal (DN), were determined through solid-phase microextraction coupled with gas chromatography/mass spectrometry (HS-SPME GC/MS) and electronic tongue (E-tongue), and the results from the two techniques were compared. Although HS-SPME GC/MS facilitates the detection and quantification of T&O compounds with high precision and accuracy, the sample preparation and handling is difficult and the analysis time (1 h) is longer than those of other analytical methods. E-tongue can be used as an alternative analytical method for water quality analysis and risk management because it enables controlled and rapid analysis (3 min) of T&O compounds in water at a low cost. Notably, principal component analysis indicated that E-tongue can discriminate and quantify eight T&O compounds at as low as 0.02 μg L-1 concentration. Further, partial least squares analysis confirmed that the sensor exhibits high sensitivity to concentration changes. The sensors with the highest variable importance in projection scores were determined to be SCS (1.39 and 1.38) for GE and MIB, CTS (1.34) for IPMP, CPS (1.33) for IBMP, AHS (1.42) for HA, ANS (1.22) for HD, and NMS (1.14 and 1.19) for ND and DN.