Wear behaviour of friction surfaced Al-Ni and Al-SiC coatings over mild steel

材料科学 冶金 复合材料 法律工程学 工程类
作者
S. Vinodh,T. S. Ramakrishnan,Ramasamy Padmanaban
出处
期刊:Materials research express [IOP Publishing]
卷期号:11 (12): 126507-126507 被引量:3
标识
DOI:10.1088/2053-1591/ad99a7
摘要

Abstract The friction surfacing (FS) method offers solid-state deposition of both identical and distinct coatings while avoiding a number of the issues that encompass the traditional fusion coating process. This study investigates FS for depositing aluminium based metal matrix composites (MMCs) onto AISI1018 mild steel substrates. The Al-2Si-15SiC and Al7075-15Ni MMC consumables used for the FS process were fabricated via stir casting. The FS process, optimized at 1200 rpm for Al-SiC and 1500 rpm for Al-Ni, resulted in refined microstructures and enhanced properties. Scanning electron microscopy (SEM) and energy dispersive x-ray analysis (EDAX) of the coating reveals surface with equiaxed and fine grains. The development of Al 3 Ni intermetallic compounds at the coating’s interface strengthens the bond by allowing the substrate and coating material to diffuse into each other. An excellent bonding strength of 147 MPa and 142 MPa is observed for the Al7075-15Ni and Al-2Si-15SiC coating deposits, respectively. In comparison to MMC consumable rods, the FS composite coating delivers 80%–85% reduction in grain size and enhances hardness. Vickers microhardness tests showed substantial hardness increases, with Al-Ni coatings reaching 183 HV. Wear tests indicated that Al-Ni coatings outperformed Al-SiC coatings and the steel substrate, exhibiting lower wear rates and friction coefficients. This research underscores FS’s effectiveness in improving the properties of aluminium MMC coatings on mild steel, with Al-Ni coatings showing exceptional wear resistance and bond strength for industrial applications.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
Tomorrow完成签到 ,获得积分10
2秒前
LU完成签到,获得积分10
2秒前
YUNDI完成签到 ,获得积分10
2秒前
学术小白完成签到,获得积分10
3秒前
水煮电吹风的应助被Nancy采纳,获得10
3秒前
容与完成签到 ,获得积分10
3秒前
饱满芷卉完成签到,获得积分10
3秒前
Niann发布了新的文献求助10
7秒前
木木完成签到 ,获得积分10
7秒前
miles完成签到 ,获得积分10
8秒前
Cc完成签到 ,获得积分10
10秒前
麻麻薯完成签到 ,获得积分10
11秒前
科研通AI65的应助被喜笑颜开采纳,获得10
13秒前
lym完成签到,获得积分10
14秒前
Zhuideal完成签到,获得积分10
16秒前
啊泽ovo完成签到,获得积分10
17秒前
梦游菌完成签到 ,获得积分10
18秒前
Xia完成签到 ,获得积分10
19秒前
缓慢仇天完成签到,获得积分10
19秒前
Wintlin完成签到,获得积分10
20秒前
沉默凌寒完成签到,获得积分10
21秒前
大白兔完成签到 ,获得积分10
25秒前
李钢完成签到,获得积分10
25秒前
清冷渊完成签到 ,获得积分10
25秒前
YiYi完成签到 ,获得积分10
27秒前
闹闹完成签到 ,获得积分10
27秒前
Keyuuu30完成签到,获得积分0
28秒前
海外寒完成签到 ,获得积分10
29秒前
等待鸽子完成签到,获得积分10
32秒前
zyx完成签到,获得积分10
32秒前
ttxxcdx完成签到 ,获得积分10
32秒前
hexing完成签到,获得积分10
33秒前
wanghao完成签到 ,获得积分10
33秒前
大惊完成签到,获得积分10
33秒前
李小浩完成签到 ,获得积分10
34秒前
dashi完成签到,获得积分10
36秒前
FanZao完成签到,获得积分10
38秒前
yang完成签到 ,获得积分10
38秒前
ljhwahaha完成签到,获得积分10
39秒前
桑稚完成签到 ,获得积分10
40秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
八旗制度の研究 600
高分子基功能界面水蒸发材料与应用研究 500
外场增强的水汽发电研究 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8185520
求助须知:如何正确求助?哪些是违规求助? 9574262
关于积分的说明 21834812
捐赠科研通 7783212
什么是DOI,文献DOI怎么找? 3434577
关于科研通互助平台的介绍 2558951
邀请新用户注册赠送积分活动 2481370