光束转向
计算机科学
控制(管理)
计算机硬件
电信
人工智能
天线(收音机)
作者
William Stevers,Daniel Paradis,Brett Ryan
出处
期刊:
[Institute of Electrical and Electronics Engineers]
日期:2024-10-15
卷期号:: 1-8
标识
DOI:10.1109/array58370.2024.10880438
摘要
Modern active electronically steered arrays (AESAs) enable highly directional electronic beamforming techniques with an aperture that has a fixed, physically small footprint. By utilizing beamforming radio frequency integrated circuits (RFICs) instead of a digital beamformer, such AESAs can be manufactured in a modular form factor with an industry standard control interface. Modern analog beamforming AESA architecture also decouples the array panel and controller from the radio, greatly reducing communication system complexity. The current practice for designing AESA controllers involves the creation of unique firmware-based controllers that must be designed for a specific AESA panel. Such controllers are expensive to develop and inhibit the modularity of the panel while offering limited functionality to the end-user and hindering future system upgrades. By moving AESA control from firmware to software with a commercial of the shelf (COTS) single-board computer (SBC), the expense of an AESA controller can be greatly reduced in terms of both the non-recurring engineering (NRE) and controller hardware cost. This design approach also creates a reusable software framework that can be quickly modified for controlling different AESA panels with the same low-cost controller. This paper explains how to implement AESA beam steering in software and then demonstrates the performance of a SBC AESA controller that was created with a Raspberry Pi 4 and a low-cost printed circuit board (PCB) daughter card.
科研通智能强力驱动
Strongly Powered by AbleSci AI