加氢脱氧
催化作用
热液循环
介孔材料
化学
化学工程
产量(工程)
水溶液
烷烃
介孔二氧化硅
涂层
硬脂酸
过渡金属
生物量(生态学)
水热合成
脂肪酸
有机化学
加氢脱硫
图层(电子)
传质
金属
工作(物理)
材料科学
作者
Xin Zhao,Jialin Yang,Bowen Chen,Bolong Li,Jin An Wang,Renfeng Nie,Jie Fu,Chunbao Charles Xu
出处
期刊:Energy & Fuels
[American Chemical Society]
日期:2025-11-14
卷期号:39 (47): 22534-22542
被引量:5
标识
DOI:10.1021/acs.energyfuels.5c04785
摘要
Low-grade oil hydrodeoxygenation (HDO) is a key route for sustainable fuel production. However, traditional transition metal catalysts suffer from poor activity and hydrothermal deactivation in aqueous acidic environments. Here, we developed a Ni/NiAl 2 O 4 @mSiO 2 catalyst by coating 4 nm mesoporous silica (mSiO 2 ) on Ni/NiAl 2 O 4 via soft templating, achieving synergistic optimization of activity and stability. At 250 °C and 3 MPa H 2, Ni/NiAl 2 O 4 @mSiO 2 matched the activity of Ni/NiAl 2 O 4, while its deactivation rate after 4 cycles (7.5%) was much lower than that of Ni/NiAl 2 O 4 (40%). It also exhibited broad applicability to eight fatty acids, delivering >96% alkane yield under optimized conditions. Characterization confirmed that the mSiO 2 layer preserved reactant diffusion/activation while enhancing mass transfer for stearic acid and preventing Ni/NiAl 2 O 4 sintering/metal leaching. This work provides critical insights for designing efficient catalysts in low-grade oil valorization.
科研通智能强力驱动
Strongly Powered by AbleSci AI