Fluid Modeling of a Non-Thermal Plasma with Dielectric Barrier Discharge and Argon as a Diluent Gas

Non-thermal plasma (NTP) conversion applications have become an emerging technology of increasing global interest due to their particular ability to perform at atmospheric pressure and ambient temperature. This study focuses on a specific case of a dielectric barrier discharge NTP reactor for carbon dioxide conversion with the usage of argon as diluent gas. The plasma computations in COMSOL® Multiphysics are compared to experimental results and coupled with previous thermodynamic characterization of argon species and fluid dynamic calculations. The model is defined as a time-dependent study with a 2D-Geometry of pure argon, with both fluid flow and plasma phenomena. Firstly, the model showcases an accurate understanding of the plasma physics involved, in the form of electron density, excited argon, argon ions, and mean electron energy. It also allows a direct comparison of the velocity, vorticity, pressure, and dynamic viscosity results with fluid flow computations. Secondly, the impact of several variables is studied, notably the inlet volumetric rate, dielectric barrier thickness and material, and reactor length. Limitations in the plasma characterization can occur by not including packed material or all relevant species in experimental CO2 conversion and their respective reactions, which should be aimed at in future contributions.