塑料挤出
材料科学
计算机模拟
机械
复合材料
物理
作者
Cheng‐Ying Liu,Shota Mikoshiba,Yutaka Kobayashi,Akira Ishigami,Daisuke Yorifuji,Shin‐ichiro Tanifuji,Hiroshi Itô
出处
期刊:Polymers
[Multidisciplinary Digital Publishing Institute]
日期:2022-03-16
卷期号:14 (6): 1201-1201
被引量:4
标识
DOI:10.3390/polym14061201
摘要
An octa-screw extruder (OSE) is equipment for pelletizing, blending, and mixing polymers and composites. In this study, the degree of resin filling, residence time distribution (RTD) of molten resin, and temperature profile in the octa-screw extruder were evaluated both experimentally and numerically. An intermeshing corotating parallel octa-screw kneading extruder was used for the experiments. For the comparison study, the results obtained from this extruder were compared with the twin-screw extruder. High-density polyethylene was selected as the material for extrusion. Meanwhile, a numerical code, based on a 2.5 D finite element method derived from the Hele-Shaw flow model, was developed to simulate the octa-screw extrusion process. The empirical outcomes suggest that octa-screw extrusion exhibited a narrower RTD of the molten resin compared with the twin-screw extrusion, suggesting better extrudate quality. The octa-screw extrusion also showed a lower temperature profile than twin-screw extrusion. The results of the simulation were also found to be in good agreement with experimental measurements. Experimental and numerical investigations of an OSE enable detailed comprehension and visualization of resin distribution in the entire length of the OSE, thus providing advantages in terms of process optimization.
科研通智能强力驱动
Strongly Powered by AbleSci AI