材料科学
微波食品加热
各向异性
电介质
煤
复合材料
煤层气
介质加热
压力(语言学)
极限抗拉强度
光学
煤矿开采
化学
光电子学
物理
有机化学
哲学
量子力学
语言学
作者
Yixin Zhao,Yirui Gao,Zhuang Zhi Sun,Sen Gao,Chuncheng Sun
出处
期刊:Fuel
[Elsevier BV]
日期:2022-06-30
卷期号:326: 125038-125038
被引量:22
标识
DOI:10.1016/j.fuel.2022.125038
摘要
Microwave heating technology is a promising solution in underground engineering, such as mining, coalbed methane extraction, and oil/gas production, that primarily depends on the conversion of microwave energy due to dielectric properties. However, inadequate understanding of the effects of dielectric properties on microwave irradiation limits further development of microwave techniques. In this study, based on the dielectric anisotropy of coal, an electromagnetic-thermomechanical coupled model was used to numerically investigate the thermodynamic response under microwave irradiation at 2.45 GHz and 1 kW for 180 s. We performed experimental verification via indoor test. Results show that the sensitivity of microwaves to the dielectric direction in the TE10 mode is x > z > y. In different dielectric anisotropy models, the temperature and maximum principal stress increase synchronously and linearly with increasing heating time, and the curve growth rate is positively correlated with the equivalent dielectric permittivity. There are also marked temperature and stress concentrations in the sample. The compressive stress is concentrated in the center of the sample, while the tensile stress is around the outer edge. For bedding coal, tensile fractures occur under microwave irradiation along the bedding, and shear fractures run through the bedding. With the increase of the input microwave energy, the failure mode of coal gradually expands from single fracture to fracture network.
科研通智能强力驱动
Strongly Powered by AbleSci AI