化学
聚合物
PEG比率
双节的
分子质量
水溶液
相(物质)
摩尔质量分布
分析化学(期刊)
高分子化学
热力学
色谱法
相图
有机化学
物理
财务
经济
酶
作者
Daniel Forciniti,Carol K. Hall,M.‐R. Kula
标识
DOI:10.1016/0378-3812(91)80002-d
摘要
In an effort to understand the molecular weight and temperature dependence of protein partition coefficients, we have conducted experiments to determine how the binodal curve and the difference in polymer concentrations between the top and bottom phases (▵PEG [PEG]T — [PEG]B and ΔDx [Dx]B — [Dx]T); depend on polymer molecular weight and temperature. We report the equilibrium compositions at 4°, 25° and 40°C for 16 different aqueous two-phase PEG-Dx systems which consist of all possible combinations of the four PEG molecular weights (4000, 6000, 10 000, and 20 000) and the four Dx molecular weights (10 000, 40 000, 110 000 and 500 000). Four tie lines were measured for each system. We confirm that increasing polymer molecular weight increases the tie line length and depresses the binodals to lower polymer concentrations, and that this effect will be greater when the ratio of this molecular weight increase to the molecular weight of the other species is large. The increase in the tie line length and in ΔDx and ΔPEG with increasing polymer molecular weight tends to level off at high polymer molecular weight and at high total polymer concentrations. It is shown that the effect of temperature is not symmetric, i.e. changes in temperature produce a change in ΔDx while ΔPEG remains nearly constant. The effect of polymer molecular weight on both ΔDx and ΔPEG is magnified with increasing temperature. The results found here suggest a series of experiments which could be used to isolate (or highlight) the effect of the second virial coefficient on the partition coefficient.
科研通智能强力驱动
Strongly Powered by AbleSci AI