Influence of Over-Cooling the Nodular Cast Iron to the Graphite Form in the Surface Layer

Influence of Over-Cooling the Nodular Cast Iron to the Graphite Form in the Surface Layer A cast iron is gradient material. This means that depending on the cooling rate it is possible, at the same chemical composition and the physicochemical state of molten metal, to obtain material with a different structure. The connection between the wall thickness of the casting and the speed of its cooling expresses the casting module. Along with the module escalation a cooling rate of the casting is reducing what can cause changes of the microstructure and the increased tendency to the crystallization of distorted graphite forms. Inspections of experimental castings from nodular cast iron with different modules were conducted to the graphite form.