Abstract The cure of a set of polyester resin samples having different styrene contents has been monitored by means of Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), rheometry, and ultrasonic measurements. FTIR and DSC experimental data were used to calculate the cure kinetics using a freeradical polymerization model (multiple steps) and also an empirical model that considers the curing to involve only a single step. The dependence of viscosity on the degree of curing has been investigated at different shear rates. Finally, correlations among the results from the different techniques have been established and discussed in terms of the curing mechanism.