光催化
二氧化钛
扫描电子显微镜
傅里叶变换红外光谱
核化学
吸附
电子顺磁共振
铬
水溶液
化学
壳聚糖
辐照
化学工程
无机化学
催化作用
材料科学
冶金
物理化学
复合材料
有机化学
核磁共振
核物理学
工程类
物理
作者
M. Hasmath Farzana,Sankaran Meenakshi
标识
DOI:10.1016/j.ijbiomac.2014.09.029
摘要
This article describes the photo-reduction of heavy metal Cr(VI) in aqueous solution using titanium dioxide impregnated chitosan beads (TCB) in the presence of UV irradiation. The synergistic role of TCB results in excellent photocatalytic behavior. The reduction of Cr(VI) by the TCB is mainly due to adsorption coupled photocatalytic reduction mechanism. The characterization of TCB was made by Fourier transform Infrared (FTIR) Spectral studies, Scanning Electron Microscope (SEM), Energy Dispersive Analysis of X-ray (EDAX) and Electron Paramagnetic Resonance (EPR) studies. The kinetics of photo-reduction of Cr(VI) is explained on the basis of Langmuir–Hinshelwood mechanism. A comparative study on the percentage removal of chromium using chitosan (CS), titanium dioxide (TiO2) and titanium dioxide impregnated chitosan beads (TCB) in the presence of UV irradiation at 60 min of contact time have been found to be 19.4%, 54.8% and 91.4% respectively. Effects of experimental parameters such as irradiation time, dose, pH, initial concentration, and co-ions were optimized for Cr(VI) removal. Suitability of TCB at field condition was tested with a sample taken from a nearby industrial area.
科研通智能强力驱动
Strongly Powered by AbleSci AI