Preparation of mesoporous anatase titania with large secondary mesopores and extraordinarily high photocatalytic performances

A mesoporous titania (SN2) with three-dimensional (3D) large secondary mesopores (6.2 nm) highly connecting the mesochannels was prepared employing the method of first synthesizing an ordered 2D hexagonal mesoporous titania-silica nanocomposite (SN1) via “synchronous-assembly” of inorganic precursors with surfactant molecules, then “extracting silica”. Our tactic adopts a large amount of silica, a high crystallization temperature and mild silica extraction. The 3D interconnectivities of the resultant mesochannels are quite high, but the mesostructures are retained intact. Titania is fully anatase crystalline with uniform nanocrystals size (11.2 nm) and a high specific surface area (∼ 174 m2 g−1). This strategy is gentle, simple and easily reproducible. SN2 presents extremely-high photocatalytic degradation activities to anionic azo dyes like acid red 1 and reactive brilliant red X3B, which reach 55.9 and 51.1 times that of commercial P25 photocatalyst, even up to 87.0 and 84.7 times that of SN1, respectively; and far higher than that of the contrast sample (CS) possessing 3D small secondary mesopores (2.7 nm). Additionally, SN2 also displays a very high activity to microcystin-LR, which is much higher than that of P25 and CS, respectively. Our results clearly indicate that the large secondary mesopores play a key role in the great increases of activities. Moreover, our photocatalyst is considerably stable and reusable. Such results have hitherto not been seen in the literature. Furthermore, this method would pave the way for the rational design and preparation of ordered mesoporous other metal-oxides with large secondary mesopores and unexpected performances.