腐蚀
材料科学
镁合金
X射线光电子能谱
合金
傅里叶变换红外光谱
复合数
无定形固体
化学工程
韧性
冶金
磷酸镁
复合材料
磷酸盐
镁
化学
结晶学
有机化学
工程类
作者
Jun Chen,Xiangna Lan,Chao Wang,Qinyong Zhang
出处
期刊:Materials
[Multidisciplinary Digital Publishing Institute]
日期:2018-03-08
卷期号:11 (3): 402-402
被引量:20
摘要
Magnesium alloy AM60 has high duc and toughness, which is expected to increase in demand for automotive applications. However, it is too active, and coatings have been extensively studied to prevent corrosion. In this work, a Ba-containing composite phosphate film has been prepared on the surface of AM60. The composition and formation mechanism of the film have been investigated using a scanning electronic microscope equipped with energy dispersive X-ray spectroscopy, Fourier transform infrared, X-ray photoelectron spectroscopy, and X-ray diffractometry tests. The corrosion resistance of the film has been measured by electrochemical and immersion tests. The results show that the deposition film has fully covered the substrate but there are some micro-cracks. The structure of the film is complex, and consists of MgHPO₄·3H₂O, MnHPO₄·2.25H₂O, BaHPO₄·3H₂O, BaMg₂(PO₄)₂, Mg₃(PO₄)₂·22H₂O, Ca₃(PO₄)₂·xH₂O, and some amorphous phases. The composite phosphate film has better anticorrosion performance than the AM60 and can protect the bare alloy from corrosion for more than 12 h in 0.6 M NaCl.
科研通智能强力驱动
Strongly Powered by AbleSci AI