电容感应
计量系统
压力传感器
数据采集
压力测量
电容
电子工程
测量仪器
观测误差
计算机科学
智能传感器
工程类
米
测量不确定度
可穿戴计算机
工作(物理)
仪表(计算机编程)
电气工程
表征(材料科学)
计算机硬件
实时计算
灵敏度(控制系统)
度量(数据仓库)
校准
动压
准确度和精密度
数码产品
测量原理
标准差
作者
Xiaofan Deng,Yiyi Fu,Jiaping Xie,Gang Jin,Dongxu Zhang,Liangyu Cui,Shi-Qi Liu,Zeng‐Guang Hou
标识
DOI:10.1109/tim.2026.3754158
摘要
Low-cost and real-time characterization of flexible capacitive pressure sensors requires microcapacitance measurement systems capable of simultaneously achieving measurement of picofarad-level capacitance, dynamic acquisition, and practical robustness. Existing commercial instruments and customized readout systems generally involve trade-offs among measurement accuracy, hardware complexity, acquisition speed, and implementation cost. To address these issues, this work proposes a task-oriented microcapacitance measurement framework based on capacitance-to-frequency conversion. The framework integrates an optimized NE555-based capacitance-to-frequency conversion circuit, timer-based period acquisition using an STC89C52 microcontroller, capacitance calibration, real-time visualization, data storage, and dynamic sensor characterization. Experimental results demonstrate an mean absolute relative error (MARE) of 1.20% over 10–1000 pF with a real-time acquisition rate of 11 Hz. Under human-proximity interference, the proposed framework maintains an average output fluctuation of only 0.21%, indicating stable output under the investigated human-proximity condition. The deviation from a commercial LCR meter is within 3.03% during flexible pressure sensor characterization. The proposed framework provides a low-complexity, low-cost, and application-oriented solution for dynamic characterization of flexible capacitive pressure sensors, offering practical potential for wearable electronics, electronic skin, and robotic tactile sensing.
科研通智能强力驱动
Strongly Powered by AbleSci AI