屈曲
有限元法
结构工程
非线性系统
理论(学习稳定性)
刚度
帧(网络)
边值问题
临界载荷
计算机科学
钢架
栏(排版)
边界(拓扑)
旋转(数学)
要素(刑法)
有限条法
基础(拓扑)
编码(集合论)
数学
数值分析
扩展有限元法
自由度(物理和化学)
刚度矩阵
混合有限元法
作者
Amirreza Karamouzian,Reza Attarnejad
摘要
Determining the load at which a column buckles is crucial for designing steel structures. In this study, an assessment of buckling loads and, consequently, the effective length factors of columns in frames that do not comply with the alignment charts’ assumptions is conducted using a nonlinear geometric finite element analysis, unlike the common method in technical literature, which obtains the buckling force using stability solutions. The reasons that the alignment charts’ solution does not satisfy frames with specific conditions are the assumptions underlying their derivation, such as idealized boundary conditions (BCs), stiffness distributions, frame interaction, and stability assumptions. Thus, for frames with different conditions, the buckling equation due to the assumed beam‐column models varies, needing to be modified for each special case. By using the custom‐made code writing provided for this research, one can solve for the buckling loads with minimal computational expense. Moreover, using the finite element method (FEM) to solve buckling loads is straightforward, user‐friendly, and helpful in many engineering topics, such as in this research. Four cases presented here demonstrate that the nonlinear FEM yields accurate results in all cases. At the end of each case, a comparison is made between the values obtained by this paper’s method, those obtained from the alignment charts, and other technical literature’s proposals. As a result, it is concluded which cases are in a more critical state.
科研通智能强力驱动
Strongly Powered by AbleSci AI