聚丙烯腈
膜
材料科学
超滤(肾)
化学工程
废水
残余油
结垢
体积流量
膜污染
生物污染
乳状液
吸水率
反冲洗
膜技术
纳米颗粒
过滤(数学)
极限抗拉强度
水处理
多孔性
接触角
制浆造纸工业
中空纤维膜
吸收(声学)
工业废水处理
微滤
海水淡化
污水处理
复合材料
工业废物
提高采收率
作者
Raad H. Khudher,Ahmad A. Hasan,Talib Mohammed Albayati,Eman H. Khader,Noori M. Cata Saady,Sohrab Zendehboudi
摘要
This study develops ultrafiltration membranes using a combination of polyacrylonitrile (PAN) and polylactic acid (PLA), modified with green nanoparticles (NPs) derived from potato peel waste (PPW) for oily wastewater treatment. We fabricate the PAN/PLA/PPW membranes by phase reversal technology and characterized them using various techniques. This work investigates the effects of adding green nanoparticles (PPW) (0.015%–0.08%) on membrane properties. At an optimal concentration of 0.05% by weight, the membrane exhibits a significant performance improvement: the water flow rate increases to 1012.7 from 524.3 L/m 2 · h for pure PAN/PLA, thanks to increased water absorption (the contact angle decreases from 66.75° to 18°), increased porosity (from 69% to 93%), and higher tensile strength (from 7.8 to 13.9 MPa), thus improving the membrane's mechanical properties. Under a feed oil concentration of 50 ppm and a pressure of 2 bar, the modified membrane achieves an oil rejection rate of 94.6%, which rises to 100% at 550 ppm, indicating robust performance at higher contaminant levels. The flow recovery rate (FRR) is 98.8%, demonstrating excellent fouling resistance, further enhanced by the low surface roughness. After four cycles of operation and cleaning, the oil discharge remains stable with only a slight decrease in flow. The residual oil in the permeable material remains at 5 ppm, compliant with the WHO environmental discharge standards. Overall, PAN/PLA/PPW membranes offer high separation efficiency, operational stability, strong fouling resistance, durability, and environmental sustainability, making them a promising and effective filter for industrial oily wastewater treatment applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI