材料科学
共价键
纳米孔
聚合
化学工程
接触角
复合材料
嫁接
气凝胶
原位聚合
微观结构
混合材料
热导率
聚合物
表面改性
共价有机骨架
乙烯醇
热稳定性
热的
极限抗拉强度
复合数
比表面积
模数
沉积(地质)
保温
电导率
紫外线
热阻
化学气相沉积
作者
Mengcheng Nie,Yong Kong,Zhixin Wang,Fuhao Xu,Jiantao Zhou,Xiaodong Shen
出处
期刊:Gels
[Multidisciplinary Digital Publishing Institute]
日期:2025-12-20
卷期号:12 (1): 4-4
被引量:1
摘要
Hydrophobic phenolic/silica hybrid aerogels were synthesized via different methyl modification methods including in situ polymerization (RA-IS), surface grafting (RA-SG), and vapor deposition (RA-VD). All the methods achieved good hydrophobicity, with a water contact angle around 140°, and the hydrophobic mechanisms were clarified. RA-IS possesses the highest specific surface area and nanopore volume, and the lowest bulk density. Therefore, it exhibits much lower thermal conductivity (32.2 mW·m−1·K−1) at 25 °C than RA-SG, RA-VD and other reported phenolic/silica hybrid aerogels. The compression strength (3.3 MPa) and Young’s modulus (19.2 MPa) of RA-IS are higher than those of its state-of-the-art counterparts. The methyl groups in RA-IS are linked in the matrix by a covalent bond, leading to excellent weather resistance under thermal, hygrothermal, and ultraviolet aging conditions. The methyl species in RA-SG and RA-VD are loaded on the surface via a covalent bond and physical adsorption, exhibiting poor weather resistance. RA-IS is incombustible and its microstructure is stable on an alcohol flame. This study provides new insights into the hydrophobicity of phenolic/silica hybrid aerogels, and offers significant guidance for developing aerogels with high strength, hydrophobicity, flame resistance, weather resistance, and insulation performance for building insulation.
科研通智能强力驱动
Strongly Powered by AbleSci AI