Influence of Replacement of Sodium Lamps in Park Luminaires with LED Sources of Different Closest Color Temperature on the Effect of Light Pollution and Energy Efficiency

According to the European Union (EU) regulations, EU members are obligated, among others, to improve the energy efficiency in the outdoor lighting sector. One of the ways to consider this fact is to install LED sources in luminaires. Due to the reasonable lighting requirements for the lighting of squares and parks, the cheapest way to modernize lighting is to replace conventional discharge lamps with LED sources in park luminaires. Using nine typical park luminaires, the influence of replacing classic sodium lamps with LED sources on the effect of light pollution and energy efficiency was analyzed. Using data, such as a photometric solid and a relative spectral distribution, simulation calculations were carried out in DIALux software and our own calculation tool to consider this issue. The studies considered 156 LED sources of different spectral distributions and a wide range of color temperatures from 1000 K to 9753 K as well as different color rendering index (CRI) values. The conducted studies showed that the replacement of sodium lamps with LED sources is not necessarily associated with an increased negative impact on the effect of light pollution. It was also found also that the CRI value has an influence on the degree of light pollution.