Effect of Dynamic High-Pressure Microfluidizer on Physicochemical and Microstructural Properties of Whole-Grain Oat Pulp

By avoiding the filtration step and utilizing the whole components of oats, the highest utilization rate of raw materials, improving the nutritional value of products and reducing environmental pollution, can be achieved in the production of whole-grain oat drinks. This study innovatively introduced a dynamic high-pressure microfluidizer (DHPM) into the processing of whole-grain oat pulp, which aimed to achieve the efficient crushing, homogenizing and emulsification of starch, dietary fiber and other substances. Due to DHPM processing, the instability index and slope value were reduced, whereas the β-glucan content, soluble protein content and soluble dietary fiber content were increased. In the samples treated with a pressure of 120 MPa and 150 MPa, 59% and 67% more β-glucan content was released, respectively. The soluble dietary fiber content in the samples treated with a pressure of 120 MPa and 150 MPa was increased by 44.8% and 43.2%, respectively, compared with the sample treated with a pressure of 0 MPa. From the perspective of the relative stability of the sample and nutrient enhancement, the processing pressure of 120 MPa was a good choice. In addition, DHPM processing effectively reduced the average particle size and the relaxation time of the water molecules of whole-grain oat pulp, whereas it increased the apparent viscosity of whole-grain oat pulp; all of the above changes alleviated the gravitational subsidence of particles to a certain extent, and thus the overall stability of the system was improved. Furthermore, CLSM and AFM showed that the samples OM-120 and OM-150 had a more uniform and stable structural system as a whole. This study could provide theoretical guidance for the development of a whole-grain oat drink with improved quality and consistency.