电源抑制比
带隙基准
电压基准
开环增益
电压
工艺角
CMOS芯片
电子工程
电气工程
放大器
材料科学
运算放大器
计算机科学
光电子学
工程类
跌落电压
作者
Jung Sik Kim,Jeongjin Roh
出处
期刊:
日期:2023-12-04
卷期号:: 1-4
被引量:1
标识
DOI:10.1109/icecs58634.2023.10382752
摘要
To mitigate a non-ideal virtual ground of bandgap reference (BGR), this paper presents a BGR that uses an impedance-splitting negative-R-assisted technique that enhances its open-loop gain, including power supply rejection ratio (PSRR). The proposed technique splits the feedback node from the input of the amplifier and mitigates the non-ideal virtual ground. It ensures an improvement in the open-loop gain, even in the presence of process, voltage, and temperature (PVT) variations. The simulation results indicated that the proposed BGR circuit provides the reference voltage of 1.198 V, a PSRR of -109 dB at low frequency, temperature coefficient (TC) of 7.27 ppm/°C, and process deviation factor values of 2.68 %. The BGR circuit was designed and simulated using 180 nm CMOS technology.
科研通智能强力驱动
Strongly Powered by AbleSci AI