材料科学
电解质
离子电导率
导线
锂(药物)
导电体
阴极
化学工程
离子键合
金属锂
快离子导体
磷酸钒锂电池
储能
电导率
无机化学
氧化物
金属
聚合物
电化学窗口
纳米技术
钛酸锂
聚合物电解质
作者
Hanwen Liu,Leqi Zhao,Pengfeng Jiang,Xiao Sun,James Hester,Shanqing Zhang,Daqin Guan,Zongping Shao
标识
DOI:10.1002/adma.202516709
摘要
Abstract Quasi‐solid‐state lithium metal batteries (QSSLMBs) hold great promise for next‐generation energy storage but face major challenges for applications, including air instability of electrolytes, high synthesis cost, and poor interfacial compatibility. Here, La(OH) 3 ‐based Li + conductor Li 0.15 Sr 0.525 La 0.6 (OH) 3 (LSLOH) is reported, which is air‐stable and cost‐effective. LSLOH serves as an ionic conductor exhibiting Li⁺ conductivity of 0.1 mS cm −1 at 30 °C. To improve interfacial transport, LSLOH is incorporated into a polyethylene oxide (PEO)‐LiTFSI polymer electrolyte (PL) to form a quasi‐solid‐state electrolyte (PL‐LSLOH). LSLOH provides additional Li⁺ transport channels, while La 3+ and Sr 2+ interact with TFSI − to promote Li⁺ mobility. Moreover, LSLOH induces the formation of a LiOH and Li 2 O‐rich solid electrolyte interphase, effectively suppressing Li dendrite growth. As a result, the LiNi 0.6 Co 0.1 Mn 0.3 O 2 | PL‐LSLOH | Li pouch cells achieve 2.2 mAh cm −2 at 0.83 mA cm −2 (with cathode loading of 19 mg cm −2 ) over 200 cycles with 92.5% initial capacity retention, underscoring the potential for scale‐up. For the first time, this work demonstrates La(OH) 3 ‐based lithium ionic conductors and electrolyte design that address key barriers to the QSSLMBs.
科研通智能强力驱动
Strongly Powered by AbleSci AI