Determining the critical buckling load of locally stiffened U-shaped steel sheet pile using dynamic correlation coefficient method

Abstract U-Shaped Steel Sheet Piles (USSSP) have buckling and bending problems during construction. In this research, the structural measure of stiffened plates applied along the longitudinal direction of USSSP is analyzed and proposed. A theoretical calculation method of stiffening effect is proposed based on the dynamic correlation coefficient method and the formula for the critical buckling load of locally stiffened USSSP is derived. A parametric analysis of the number, width, and arrangement scheme of the stiffened plates on the USSSP with different lengths is examined. The empirical formula derived for the total stiffening area and the critical load of the axial compression members of the USSSP is compared with practical results from an engineering case study. The results show a quadratic function under the condition of arranging the different number of stiffened plates at equal intervals, which is accurate in deriving the critical load values USSSP after local stiffening, and provide a theoretical basis for the optimization design of local reinforcement of USSSP axial compression members in engineering projects.