振动
桥(图论)
能量收集
悬臂梁
压电
电压
结构工程
声学
功率(物理)
工程类
能量(信号处理)
电气工程
物理
量子力学
医学
内科学
作者
Michaël Peigney,Dominique Siegert
标识
DOI:10.1088/0964-1726/22/9/095019
摘要
This paper focuses on energy harvesting from traffic-induced vibrations in bridges. Using a pre-stressed concrete highway bridge as a case study, in situ vibration measurements are presented and analysed. From these results, a prototype of a cantilever piezoelectric harvester is designed, tested and modelled. Even though the considered bridge vibrations are characterized by small amplitude and a low frequency (i.e. below 15 Hz), it is shown that mean power of the order of 0.03 mW can be produced, with a controlled voltage between 1.8 and 3.6 V. A simple model is proposed for theoretical prediction of the delivered power in terms of traffic intensity. This model shows good agreement with the experimental results and leads to a simple but effective design rule for piezoelectric harvesters to be used on bridges.
科研通智能强力驱动
Strongly Powered by AbleSci AI