Color-Stable and High-Efficiency Blue Perovskite Nanocrystal Light-Emitting Diodes via Monovalent Copper Ion Lowering Lead Defects

Light-emitting diodes using metal halide perovskite (PeLEDs) exhibit a strong potential for emerging display technologies due to their unique optoelectronic characteristics. However, for blue emission PeLEDs, there remains a huge challenge to achieve high performance, an issue that has been addressed in their red and green counterparts. The community is circumventing the challenges in synthesizing stable, high-quantum-efficiency, and low-defect-density blue emitters. Here, a facile strategy that replaces Pb by adding a monovalent ion Cu+, in this case into CsPbClBr2 perovskite, is carried out. This decreases the Pb dangling bonds and increases the radiative recombination for the enhancement of blue emission. The nanoparticles obtained by this method maintain a blue emission at 479 nm. The photoluminescence quantum yield is 2 times higher than the pristine analogue. The corresponding perovskite nanocrystal (PNC) LEDs achieve stable electroluminescence spectrum at high brightness. Simultaneously, the optimal blue PNC LEDs obtain the maximum values of luminance and external quantum efficiency of 1537 cd m-2 and 3.78%, respectively. And the device realizes typical blue light CIE chromaticity coordinates of (0.098, 0.123). Our work reveals that the substitution of Pb by heterovalent ions significantly decreases nanocrystal defects, which will pave the way of perovskite LEDs for practical applications in the future.