光催化
水溶液
矿化(土壤科学)
二氧化钛
化学
核化学
羟基自由基
吸附
石墨烯
氧化物
降级(电信)
无机化学
氧化钛
材料科学
激进的
催化作用
有机化学
纳米技术
复合材料
氮气
电信
计算机科学
作者
Davoud Balarak,Nezamaddin Mengelīzadeh,Periakaruppan Rajiv,Kethineni Chandrika
标识
DOI:10.1007/s11356-021-13525-1
摘要
The photocatalytic degradation of amoxicillin (AMX) by titanium dioxide nanoparticles loaded on graphene oxide (GO/TiO2) was evaluated under UV light. Experimental results showed that key parameters such as initial pH, GO/TiO2 dosage, UV intensity, and initial AMX concentration had a significant effect on AMX degradation. Compared to the photolysis and adsorption processes, the AMX degradation efficiency was obtained to be more than 99% at conditions including pH of 6, the GO/TiO2 dosage of 0.4 g/L, the AMX concentration of 50 mg/L, and the intensity of 36 W. Trapping tests showed that all three hydroxyl radical (OH•), superoxide radical (O2•−), and hole (h+) were produced in the photocatalytic process; however, h+ plays a major role in AMX degradation. Under UV irradiation, GO/TiO2 showed excellent stability and recyclability for 4 consecutive reaction cycles. The analysis of total organic carbon (TOC) suggested that AMX could be well degraded into CO2 and H2O. The formation of NH4+, NO3-, and SO42- as a result of AMX degradation confirmed the good mineralization of AMX in the GO/TiO2/UV process. The toxicity of the inlet and outlet samples of the process has been investigated by cultivation of Escherichia coli and Streptococcus faecalis, and the results showed that the condition is suitable for the growth of organisms. The photocatalytic degradation mechanism was proposed based on trapping and comparative tests. Based on the results, the GO/TiO2/UV process can be considered as a promising technique for AMX degradation due to photocatalyst stability, high mineralization efficiency, and effluent low toxicity.
科研通智能强力驱动
Strongly Powered by AbleSci AI