Polyoxymethylene/thermoplastic polyamide elastomer blends: Morphology, crystallization, mechanical, and antistatic properties

Polyoxymethylene/thermoplastic polyamide elastomer (POM/TPAE) blends were prepared through melt extrusion in an attempt to improve the toughness and electrical properties of POM. The TPAE used in the study had the permanent antistatic effect, and its brand was MV2080. Acrylonitrile-butadiene-styrene copolymer grafted maleic anhydride (ABS-g-MAH) was added while preparing the POM/TPAE blends to improve the compatibility between TPAE and POM. The effects of TPAE and ABS-g-MAH on the morphologies, melting crystallization, dynamic mechanical analysis, surface resistivity and mechanical properties were examined in detail with various techniques. It was found that after adding 15 phr MV2080 as the modifier, the distribution of MV2080 in the blends was presented as many continuous long strips, which can be called “antistatic networks.” When using ABS-g-MAH as a compatibilizer, the surface resistivity of the samples 5#, 6#, and 7# which all containing 15 phr MV2080 with the best antistatic properties reached 10 7 Ω, and the impact strength of the above samples was all increased by more than 66%.