Water resources are threatened given the fact that (emerging) contaminants are continuously introduced into water bodies. In view of providing safe water to humans and our aquatic ecosystems, current policy and legislative frameworks are stressing the need for advanced yet cost-effective water treatment approaches. Advanced oxidation processes are key in this context, but their performance is often limited by interactions between the organic matrix components (e.g. humic acids), the target micropollutants (µPs) and the added or generated oxidants. Ozonation is one of the most performant technologies, yet its dosing must be carefully optimized to avoid excessive energy use and undesirable by-products such as bromate. Combining ozonation with activated carbon (AC) adsorption can enhance µP removal while mitigating these drawbacks, though determining the optimal dosing control and sequencing of both processes remain challenging. This study investigates various ozone and powdered AC (PAC) dosing strategies, with a focus on their sequential order. When applying ozonation first, or when combined with simultaneous AC addition, the µP removal efficiency increases by 5–10 % and the time to achieve 80 % removal halves, compared to the situation where AC is dosed prior to ozone addition. Pre-ozonation modifies the properties of effluent organic matter (EfOM) (e.g., hydrophobicity), reducing its competition with μPs for AC adsorption sites, while AC pre-adsorption shows limited benefit on the subsequent ozonation process. These findings support applying ozonation (optimal dose of 0.5 mg O3/mg DOC) before or simultaneously with AC addition, followed by an AC polishing step, to achieve efficient µP removal while minimizing the formation of by-products. Reliable real-time monitoring is essential for effective process control. Although an optimal ozonation dose of ~0.5 mg O3/mg DOC is recommended, current practice lacks reliable strategies to balance O3 and AC dosing in real time, often leading to overdosing, increased costs and carbon footprint, or insufficient µP removal. Although surrogate parameters have shown promise in stand-alone ozonation or AC systems, integrated monitoring of the combined process is still scarce. This study therefore establishes a whole-process surrogate strategy for real-time optimization of O3 and AC dosing, enabling more efficient control and supporting the broader implementation of intelligent tertiary treatment for micropollutant removal.