材料科学
吸收(声学)
光电子学
兴奋剂
蒸发
多晶硅
堆栈(抽象数据类型)
图层(电子)
欧姆
硅
微晶
硼
俄歇效应
螺旋钻
光学
扩散
自由载流子吸收
薄脆饼
耗尽区
接触电阻
非晶硅
太阳能电池
重组
电阻式触摸屏
航程(航空)
分析化学(期刊)
电接点
钝化
反射损耗
载流子寿命
灵敏度(控制系统)
作者
Zhibin Jiang,Fen Yang,Yi Xie,Taihong Xie,Lili Wu,Xia Hao,Guanggen Zeng,Zhengguo Yuan,Jingquan Zhang
标识
DOI:10.1051/epjpv/2026025
摘要
Tunnel-oxide passivated back-contact (TBC) solar cells combine TOPCon-type passivating contacts with an interdigitated rear-contact architecture. Their efficiency is controlled by mutually coupled optical absorption, lateral transport, and recombination losses in the rear p-type and n-type poly-Si contacts. In this work, Quokka3 was used as a three-dimensional device-level sensitivity tool constrained by a production-line reference device, wavelength-dependent optical-generation profiles, electrochemical capacitance-voltage (ECV) active-doping measurements, and factory process windows. The purpose of the simulations was not to reproduce every production batch, but to separate loss mechanisms that cannot be independently varied in finished cells. Thickness scans show that parasitic absorption in n-type poly-Si is the dominant thickness-related limitation to J sc , whereas p-type poly-Si exhibits a broader trade-off between optical loss and metal-contact shielding. With p-type poly-Si at Rsheet = 100 Ohm sq −1 and n-type poly-Si fixed at 3 × 10 20 cm −3 and 340 nm, the preferred p-type active-doping range is 4 × 10 19 –6 × 10 19 cm −3 , giving simulated efficiencies of 27.109–27.112% under the stated boundary conditions. Increasing n-type poly-Si doping progressively reduces J sc through free-carrier absorption and Auger recombination unless the loss is compensated by lower contact resistance. ECV confirms a pronounced boron diffusion tail in p-type poly-Si and a box-like phosphorus profile in n-type poly-Si, providing material-level constraints for the simulation inputs. Production data provide trend-level validation: stable p-type poly-Si processing occurs near 290–300 nm and 115–135 Ohm sq −1 , whereas an n-type poly-Si layer of approximately 340 nm and 27 Ohm sq −1 remains the robust industrial condition. The study therefore presents the Quokka3 results as experimentally constrained process guidance and identifies which predictions still require targeted production-line validation.
科研通智能强力驱动
Strongly Powered by AbleSci AI