Diffusion-Limited Stability of Lithium Metal Anodes in LiFSI/Glyme-Based Solvate Ionic Liquid Electrolytes

Localized high-concentration electrolytes containing bisfluorosulfonyl imide (LiFSI), dimethoxyethane, and fluoroethers greatly extend the lifetime of lithium metal batteries compared to conventional organic carbonate-based electrolytes. However, the intrinsic flammability of dimethoxyethane (G 1 ) presents a safety concern, motivating the exploration of more thermally stable alternatives such as diglyme (G 2 ), triglyme (G 3 ), or tetraglyme (G 4 ). This study investigates the effect of glyme length on Li + transport and the stability of lithium metal anodes (LMAs) in a series of solvate ionic liquid (SIL) electrolytes containing LiFSI, G n ( n = 1–4) and 1,1,2,2-tetrafluoroethyl 2,2,3,3-tetrafluoropropyl ether in a 1:1:4 mole ratio. The combination of impedance spectroscopy, Raman spectroscopy, and DFT calculations reveals an approximately 10-fold increase in the interfacial impedance of LMAs (from 20 Ω·cm 2 in G 1 to 200 Ω·cm 2 in G 4 ) due to the chelation of Li + ions by longer-chain glymes. A similar trend is observed in the lithium transference number, which decreases from 0.22 in G 1 to below 0.05 in G 3 and G 4 . As a result, the slow diffusivity of Li + ions in SIL electrolytes limits the rate capability of LMAs in asymmetric Cu–Li cells and full cells with high-loading (19 mg·cm –2 ) LiNi 0.8 Co 0.15 Al 0.5 O 2 positive electrodes to ∼1 mA·cm –2 at room temperature. Overall, this work presents a systematic framework underlying the transport limitation of glyme-based SIL electrolytes for their applications in LMBs.