尾矿
材料科学
胶凝的
复合材料
抗压强度
水泥
冶金
作者
Soumya Roy,Charakho N. Chah,Arnab Banerjee,Sanandam Bordoloi,S. Sreedeep
标识
DOI:10.1061/jmcee7.mteng-18706
摘要
The use of waste iron ore tailings (IOT) in concrete production possesses a relatively high carbon footprint during preprocessing, has associated issues of leaching and performs poorly in severe environments due to its hydrophilicity. This proof-of-concept study aims to develop hydrophobized IOT by coating it with stearic acid. The hydrophobized iron tailings (HIT) are utilized as a pore filling material to develop hydrophobic concrete for low to medium load bearing applications. The HIT as an additive was studied at 30%, 40%, 50%, and 60% (filler to sand ratio by weight) amendment rates to produce cementitious composites in parallel with conventionally used fly ash (FA) and hydrophobized fly ash (HFA). The results revealed that both HIT and HFA when used as pore fillers could render the final cementitious blocks hydrophobic due to visible impregnation of hydrophobic surface functional groups (─ CH3, ─ CH2) with a mean contact angle between 120° and 143°. Consequently, the 24-h water absorption of these hydrophobized mortars under submerged conditions decreased by 87%, with respect to the conventional FA-based blocks. At 30% amendment, the near-superhydrophobic HIT–based blocks had the highest 28-day compressive strength at 18 MPa among all tested blocks. This is primarily attributed to the pore filling effects and high calcium-silica-hydrate formation. At application rates higher than 30%, the strength reduced considerably (around 7 MPa at 60% application rate) due to the dissolution of hydrated calcium hydroxide [Ca(OH)2] when it reacts with the stearic acid of the coating. Nevertheless, based on mechanical strength properties and water absorption measurements of HIT blocks, it can be inferred that these hydrophobic mortars could be used in a range of applications, such as mine backfilling material or as pedestrian blocks for municipality development. This would likely be more durable against moisture-based attacks under severe environments (freeze-thaw and extreme pH).
科研通智能强力驱动
Strongly Powered by AbleSci AI