Fault diagnosis of landing gear retraction system with bond graph under uncertain conditions

Given the lack of sufficient historical data for aircraft landing gear retractor systems, a model-based fault diagnosis approach is needed to overcome this data deficiency. Meanwhile, inherent uncertainties are inevitable in engineering practice, and it is a great challenge to construct a model that accurately reflects the complexity of the actual system under uncertain conditions. Due to the urgent need for reliable model-based diagnostic methods and the need to cope with inherent uncertainties, this paper proposes an improved fault diagnostic method aimed at increasing the diagnostic efficiency of the landing gear retractor system, a critical component in aircraft take-off and landing operations. Due to a lack of historical data, the model-based fault diagnosis method can solve the problem of lack of data. The proposed uncertainty method addresses the challenge of multiple sources of uncertainty by using subsystems to reduce complexity. Fault diagnosis is achieved by comparing residuals with thresholds derived from a diagnostic bond graph (DBG) model. To address the problem of limited fault data, we modeled and simulated the landing gear retractor system using AMESim®. In addition, the linear fractional transform (LFT) approach has been used to resolve parametric uncertainties, but is unable to resolve system structural uncertainties. Therefore, we also analyzed the comparative fault diagnosis results derived from the linear fractional transformation-DBG (LFT-DBG) and the subsystem-DBG approaches. The experimental results support the effectiveness of the subsystem approach in improving fault diagnosis accuracy and reliability, highlighting its potential as a viable diagnostic strategy in aerospace engineering applications.